BA 1001/1501/2001 us – Edition 3.3 * * 12001b540.fm 5-37MaintenanceClean and adjust the fuel injection pump 7 ● ●Check and adjust the injection pressure of the injection nozzles, clean the injection needles/nozzles ● ●Check and adjust injection time 8 ● ●Empty diesel fuel tank 9 ● ●Check battery electrolyte. Add distilled water if necessary ● ● ●Check alternator, starter and electric connections, bearing play and function ● ●Check preheating system and electric connections ● ●Pressure check of primary pressure limiting valves10 ● ● ●Check tracks for cracks and cuts ● ●Check track tension. Retighten if necessary ● ●Check bearing play of tread rollers, track carrier rollers, front idlers ● ●Check piston rods for damage ● ●Check screws for tightness11 ● ● ●Check pin lock ● ●Check line fixtures ● ●Check indicator lights for correct function ● ● ●Couplings, dirt pile-up on hydraulic system dust caps if necessary ● ●Check insulating mats in engine compartment for damage/condition ● ●Check labels and Operator’s Manual for completeness and condition ● ●5.15 Maintenance plan 1001 – 1501 (overview)Work descriptionFor servicing and maintenance on the attachment, please refer to the operation and maintenance manual of the attachmentmanufacturer as well.Maintenance plan/operating hours (o/h)Maintenance(once a day)Every 50 o/hEvery 500 o/hEvery 1000 o/honce a yearCustomerWacker Neusonservice center
