Wacker Neuson G 50 Operator's Manual

Also see for G50: Operator's manual Operator's manual

Contents

Maintenance G 5076 wc_tx001050gb.fm7.2 New Machines7.2.1 Run generator at least 60–100% of continuous load for the first 100hours.7.2.2 Change engine oil and replace oil filter after the first 50 hours.7.3 Resetting the Periodic Maintenance TimerAfter maintenance has been performed on the generator, it isnecessary to reset the periodic maintenance timer.Resetting from Maintenance Timer MenusThe periodic maintenance timer can be reset while viewing themaintenance timer pre-alarm or hours remaining. To reset theperiodic maintenance timer while viewing these menus, press andhold the reset button (6) for 10 seconds.If pre-alarm is active:• Main screen• METERING > ALARM STATUS > PRE-ALARMSIf pre-alarm is not active:• METERING > ENGINE• METERING > RUN STATISTICS > CUMULATIVE >CUMULATIVEResetting from Main MenuThe periodic maintenance timer can also be reset from the mainmenu.