Wacker Neuson RS 800A Operator's Manual

Operation RS 800 /...wpm_tx001253gb.fm 224.9 Direction and Speed ControlSee Graphic: wc_gr003473Travel direction and speed is controlled by the travel lever. To move inthe forward direction, pull (toward the operator) on the right side (a) ofthe travel lever. To move in the reverse direction, pull (toward theoperator) the left side (b) of the travel lever. The further toward theoperator the lever is pulled, the faster the machine will travel. Whenneither side of the travel lever is pulled, the travel lever is spring-centered to the stopped position.Keep both hands on the guide handle while operating the machine.The guide handle may pivot rapidly when the machine changes traveldirection. This sudden movement of the guide handle can cause injuryif the guide handle is not under control.4.10 Exciter (Vibration) ControlSee Graphic: wc_gr003473The exciter provides the vibration and can be used in most applicationsinvolving cohesive-type soils with heavy clay content, as well as loosesoils and gravel.The vibration is controlled by the lever (c) on the guide handle. Movingthe lever forward turns the vibration ON and reverse to turn thevibration OFF.DO NOT run machine with the vibration on over hard surfaces likeconcrete or compacted asphalt. The drum bearings can be damaged.CAUTIONwc_gr003473a bcCAUTION