Wacker Neuson RS 800A Operator's Manual

Safety Information RS 800 /...wpm_si000354gb.fm 62.1 Operating SafetyFamiliarity and proper training are required for the safe operation of themachine. Machines operated improperly or by untrained personnelcan be hazardous. Read the operating instructions contained in thismanual and the engine manual, and familiarize yourself with thelocation and proper use of all controls. Inexperienced operators shouldreceive instruction from someone familiar with the machine beforebeing allowed to operate it.2.1.1 Never operate this machine in applications for which it is not intended.2.1.2 Do not touch the engine or muffler while the engine is on orimmediately after it has been turned off. These areas get hot and maycause burns.2.1.3 Do not use accessories or attachments that are not recommended byWacker Neuson. Damage to equipment and injury to the user mayresult.2.1.4 Always wear protective clothing appropriate to the job site whenoperating the machine.2.1.5 ALWAYS remain aware of moving parts and keep hands, feet, andloose clothing away from the moving parts of the machine.2.1.6 Read, understand, and follow procedures in the Operator’s Manualbefore attempting to operate the machine.2.1.7 ALWAYS check that all controls are functioning properly immediatelyafter start-up! DO NOT operate machine unless all controls operatecorrectly.2.1.8 ALWAYS remain aware of changing positions and movement of otherequipment and personnel on the job site.2.1.9 ALWAYS remain aware of changing surface conditions and use extracare when operating over uneven ground, on hills, or over soft orcoarse material. The machine could shift or slide unexpectedly.2.1.10 ALWAYS use caution when operating near the edges of pits, trenchesor platforms. Check to be sure ground surface is stable enough tosupport the weight of the machine and operator and there is no dangerof the machine sliding, falling or tipping.2.1.11 Always operate machine with all safety devices and guards in placeand in working order. Do not modify or defeat safety devices. Do notoperate machine if any safety devices or guards are missing orinoperative.2.1.12 ALWAYS position yourself safely when operating machine in reverseor on hills. Leave enough space between yourself and the machine soyou will not be placed in a hazardous position should the machine slideor tip.WARNING