2020IndexContentsIndexContentsCONFIGURING THE TABLET ORIENTATIONSet up Intuos4 as shown below for right- or left-handed operation.USB CABLE INSTALLATIONTablet setup for left-handed operationOpen the Wacom Tablet control panel and select the M APPINGtab. Choose the EXPRESS KEYS R IGHT orientation option – thetablet driver automatically configures all aspects of the tablet(including the Wacom Tablet control panel options) for correctleft-handed use.Next, physically rotate your tablet so the tablet ExpressKeys arepositioned to the right. As desired, reconfigure the USB cableinstallation.Tablet setup for right-handed operationOpen the Wacom Tablet control panel and select the M APPINGtab. Choose the EXPRESS KEYS L EFT orientation option – thetablet driver automatically configures all aspects of the tablet(including the Wacom Tablet control panel options) for correctright-handed use.Next, physically rotate your tablet so the tablet ExpressKeys arepositioned to the left. As desired, reconfigure the USB cableinstallation.Note: You are prompted to choose a default tablet orientation during the original tablet installation process using theWacom Tablet CD. At the log-in and user switching screens, the tablet orientation will use the default setting selectedwhen the driver was installed.You can always change how your tablet is oriented using the above procedure. But if you want to change the tabletdefault orientation, you must re-install the driver from the Wacom Tablet CD.Depending on your tablet model, choose the USB port or cablerouting solution that best applies to your operating configuration.• For Intuos4 M or L tablet models, slide the USB port accesscover to one side or the other. Then attach the USB cable.• For Intuos4 S tablet models, select the right- or left-handedUSB cable and attach it to the tablet port. Be careful tocorrectly match the cable connector to the tablet USB port.• For Intuos4 XL tablet models, route the USB cable using thetablet cable guides.Next, connect the other end of the USB cable to your computer.Cable paths,Intuos4 SCable paths,Intuos4 XLRight-handed use.Left-handed use.