5656IndexContentsIndexContentsTESTING YOUR TOOLSIf an input tool does not work as you expect, first open the Wacom Tablet control panel and check theassigned functions or reset the tool to its default condition.• To quickly return a tool to the default settings, remove it from the TOOL list by clicking on the control panellist’s [ – ] button.• After the tool has been removed, place it back onto the tablet. The tool will be added back to the TOOL listwith its default settings.To test your input tools:• In the Wacom Tablet control panel, click on the A BOUT button. In the dialog box that appears, click on theDIAGNOSE... button. The DIAGNOSTICS dialog box displays to show dynamic information about the tablethardware and pointing devices.• If you have more than one tablet connected to your system, in the TABLET I NFO column select the tabletfor which you are testing your tool.• Use the information presented in the DIAGNOSTICS dialog box when testing your tablet and tools.Note: When testing your tool buttons, if a button is set to RADIAL M ENU or O PEN /RUN ..., that function will occurwhen the button is pressed. In this case you may want to change that button function before testing.Testing a penTesting the Touch RingTesting the ExpressKeysTesting the mouse