Wacom PL-500 Installation Manual And User's Manual

Contents

1 4Macintosh Hardware Cabling DiagramCPL-500 Rear PanelRear panelof yourcomputerVideo card(DVI or DFP)CRTmonitor(optional)DVI-to-DVI or DVI-toDFP cableAC Adaptor To ACOutletADBCAUTIONDo not connect or disconnect the DVI videocable while the power cable is attached tothe PL-500 or your computer is turned on –this can damage the LCD display or computervideo card.D R I V E R I N S T A L L A T I O N F O R M A C I N T O S H2. Install the Wacom Tablet Driver SoftwareAfter connecting the hardware to your computer and setting up the PL-500 as a monitor, you mustinstall the tablet software from the Wacom CD.n Disable any virus protection programs and close all open applications before installing thesoftware.n Insert the Wacom CD into your computer’s CD-ROM drive.n Double-click on the Install icon. Choose your language option, click OK, and follow theprompts.n Adobe Acrobat Reader V4.0 or greater is required to view the online Help. When the Wacomtablet Read Me file displays, select Continue... to install Adobe Acrobat Reader, or Quit tofinish without installing Acrobat Reader.n Restart your computer. You may register your tablet when prompted. (Electronic registrationis only available in some regions.)You should now be able to use your UltraPen on the tablet to move the screen cursor.You now need to calibrate the tablet so that the screen cursor position lines up with the positionof the UltraPen. (See Calibrating the PL-500 on page 20.) Be sure you have selected the PL-500as the monitor to calibrate.EPL500_Content 5/9/2000, 2:06 PM14