Wacom PL-500 Installation Manual And User's Manual

Contents

8STATUS POWERPL-500 Component FunctionsF R O N T V I E WPower SwitchTurns the power to thePL-500 LCD pen tabletsystem on or off.Power LampLights green when powerhas been supplied to thePL-500 and computer anda video signal is present.In addition, this lampflashes at two-secondintervals if your com-puter enters a powermanagement mode inwhich image signals arenot sent.Integrated Tabletand LCD Screen *1The LCD monitor andtablet sensor functionas an integrated inputand output device.The LCD resolution is1,024 x 768 pixelsat 16,777,216 colors.The tablet sensor re-ports pen coordinates,pressure, switch, anderaser information.The characteristics ofthe LCD may cause aninaccurate display ofcolor tones. It is rec-ommended that thetones be checked on acolor-adjusted CRTmonitor.Status LampLights green when thepen tip or a side switch ispressed, or when theeraser enters proximity ofthe LCD screen.*1 On a TFT liquid crystal display, a very small number of pixels may be permanently illuminated or notilluminated at all. This does not mean that the display is defective.PL500_Content 5/9/2000, 2:06 PM8