Wahlberg 245 Winch 50 User Manual
               | |
805.245.005 Date: January 10, 20179Adjusting limit switchesJust under the drum there is a small black box. When you take the lid of this box the limits can beadjusted.The limits are adjusted by turning the screws.First loosen the middle screw.Then the bottom limit is adjusted by turning the screw with a 1 next to it.The top limit is adjusted by turning the screw with a 2 next to it.When adjustments are done tighten the middle screw again.The limits are factory adjusted to stop 10 cm below the winch and have a travel length of 12.5m.There must always be 2 rounds left on the drum when the winch is as the bottom limit.Note: Be careful that the top limit is not set in a position where the load can run into thewinch itself, this might damage the winch. |
Related manuals for Wahlberg 245 Winch 50
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine