Wahlberg 245 Winch 50 User Manual
               | |
805.245.005 Date: January 10, 201712LED FunctionsDMX LEDThe DMX lamp will be steady green when receiving a DMX signal.The DMX lamp will flash green if no DMX signal is present.Error LEDThe error LED will light red if there is an error.Reset error is done by setting DMX channel 4 to 0.When the Error LED lights red, there will also be an error description in the display.Errors and error codes:Winch will not start, display shows nothing. Check if the winch is connected to mains power.Check if the fuse in the winch is blown.Winch will not start, DMX lamp is blinking. Check DMX signalThe wire is not wound up on the drum correctly. Manually lower the wire totally off the drum,while controlling that the wire comes out of thewinch evenly. Afterwards the wire is rolled backonto the drum.Reset the top position afterwards.Display says “Not in Pos” The winch cannot move to its position, thisusually occurs when the load is high. To solvethis go into the menu and increase the Minimumspeed up.Power failure:The winch will stop at power failure. When the power is re-established, the winch has to be resetbefore it is ready to use.It is advisable to set all the DMX channels on 0 % before the power is re-established. |
Related manuals for Wahlberg 245 Winch 50
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine