Wahlberg 245 Winch 50 User Manual
               | |
805.245.005 Date: January 10, 20178MENUThe menu structure is divided into two different areas for safer motor control.Control modeThe display shows: DMX CONTROL .START CHAN 1Menu navigation modeTop Line shows MENU NAVIGATEIn menu navigate mode, the different parameters can be changed.In menu navigate mode the motor is stopped and DMX input has no effect, the motor can be movedby the MAN UP/DWN menu though.Menu mode changeMENU - NAVIGATE:The top line of the display is showing: DMX CONTROLPush the buttons UP & DOWN and hold them for 3 seconds.Now the top line of the display should show: MENU NAVIGATEMENU - DMX CONTROL:Go back to the starting position and activate DMX controlThe top line of the display is showing: MENU NAVIGATEPush the buttons UP & DOWN and hold them for 3 seconds.Now the top line of the display is showing: DMX CONTROLNavigate the menuThe top line of the display is showing: MENU NAVIGATEPush the buttons UP or DOWN to go up and down in the menu choices.The bottom line of the display is showing: DMX ADDR 1Adjusting menu parametersThe top line of the display is showing: MENU NAVIGATEThe bottom line of the display is showing: DMX ADDR 1Push ENT to change the DMX ADDR value.The top line of the display is showing: EDIT MENU VALUESThe bottom line of the display is showing: DMX ADDR 1Save changed valueThe top line of the display is showing: EDIT MENU VALUESThe bottom line of the display is showing: DMX ADDR 270Push ENT to change the top line to: SAVING 1-20Then press and hold ENTThe top line of the display counts up to 20 then shows OK. SAVING OKThe Value is now saved in the memory. |
Related manuals for Wahlberg 245 Winch 50
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine