Wallenstein BX36S Operating Manual
Also see for BX102S: Operator's manualOperator's manual
                                                    | |
Contents
| 
Familiarization BX36S3PH Self-feed Chipper187.2 Replace Damaged Safety Signs1. Keep safety signs clean and legible at all times.2. Replace safety signs that are missing or havebecome illegible.3. Parts that were replaced with a safety label onthem must also have the safety sign replaced.4. Replacement safety signs are available from yourauthorized Distributor or Dealer Parts Departmentor the factory.7.3 How to Install Safety Signs1. Be sure that the installation area is clean and dry.2. Be sure temperature is above 50 °F (10 °C).3. Determine exact position before removing thebacking paper.4. Remove the smallest portion of the split backingpaper.5. Align the sign over the specified area and carefullypress the small portion with the exposed stickybacking in place.6. Slowly peel back the remaining paper and carefullysmooth the remaining portion of the sign in place.7. Small air pockets can be pierced with a pin andsmoothed out using the piece of sign backingpaper.8. Familiarization8.1 To the New Operator or OwnerWallenstein BX Series Wood Chippers are designed tochip and chop scrap lumber, small trees, brush, limbsand other wood debris. The chipped material is fineenough to be composted or used in a variety of ways.It is the responsibility of the owner or operator toread this manual and to train all other operatorsbefore they start working with the machine. Followall safety instructions exactly. Safety is everyone'sbusiness. By following recommended procedures,a safe working environment is provided for theoperator, bystanders and the area around the worksite. Untrained operators are not qualified to usethe machine.Many features incorporated into this machine are theresult of suggestions made by customers like you.Read this manual carefully to learn how to use thechipper safely and how to set it to provide maximumfield efficiency. By following these instructions inconjunction with a good maintenance program, yourBX Wood Chipper will provide many years of trouble-free service.IMPORTANT! Make sure all operatorsunderstand how to place the machine in a SafeCondition before working with this machine. Seepage 9.8.2 Operator OrientationIMPORTANT! The directions for left-hand,right-hand, backward and forward mentionedthroughout this manual are determined whenfacing the chipper chute. |
Related manuals for Wallenstein BX102S
manualsdatabase
Your AI-powered manual search engine