Wallenstein BX36S Operating Manual
Also see for BX102S: Operator's manualOperator's manual
                                                    | |
Contents
| 
Operation BX36S3PH Self-feed Chipper2812.4 Machine Break-InAlthough there are no operational restrictions onthe Wood Chipper when used for the first time, it isrecommended that the following mechanical items bechecked.Place the machine in the Safe Condition beforechecking any components. (See Safe Condition onpage 9).After operating for 1 hour:• Torque all fasteners and hardware.• Check condition of rotor bearings.• Check the condition and clearance of the twig-breaker, rotor and stationary blades. Adjust orreplace as required.• Check for entangled material. Remove allentangled material before resuming work.• Lubricate all grease fittings.After operating for 10 hours:• Repeat steps 1 through 6 listed above.• Go to the normal servicing and maintenanceschedule as defined in the Maintenance Section.12.5 Pre-Operation ChecklistEfficient and safe operation of the Wallenstein 3 PointHitch Wood Chipper requires that each operatorread and understand the using procedures and allrelated safety precautions outlined in this section. Apre-operation checklist is provided for the operator. It isimportant for both the personal safety and maintaininggood mechanical condition that this checklist isfollowed.Before operating the Wood Chipper and each timethereafter, the following areas should be checked:Pre-operation ChecklistCheck and lubricate the machine per theschedule outlined in the MaintenanceSection.Check the rotor housing and discharge chute.Remove any blockages, twine, wire or othermaterial that has become entangled .Check the condition and clearance of the twigbreaker, rotor and stationary blades. Adjust orreplace as required.Check that all bearings turn freely. Replaceany that are rough or seized.Check and ensure that all covers, guards andshields are in place, secured and functioningas designed.Check all fasteners and tighten, and ensureyour equipment is working and in good repair.Check that personal protection equipmentincluding hard hat, safety glasses, safetyshoes, safety vest, hearing protection andgloves are being used and in good repair.Check that all loose fitting clothing or jewelryis not worn and loose long hair is tied back. |
Related manuals for Wallenstein BX102S
manualsdatabase
Your AI-powered manual search engine