Waukesha 200 series Operation, Maintenance And Parts Manual
Also see for 200 series: Operation and maintenance manual
                                                     | |
Contents
| 
14 95-03009ELECTRICAL CONNECTIONSMOTOR1. Read motor manufacturer's instructionsbefore making installation.2. Read nameplate to be certain that motor iscompatible with electrical supply and that allwiring, switches, starters, and overloadprotection are correctly sized.3, Following electrical installation, checkpump rotation. Facing pump, the correctrotation is counterclockwise. (Figure 15)Do this procedure after disassembly for finalcleaning and prior to FINAL PUMP CHECK.INSTALLATIONWARNINGTo avoid electrocution, ALL electricalinstallation should be done by a registeredElectrician, following Industry SafetyStandards.All power must be OFF and LOCKED OUTduring installation.CLEAN PUMP AND PIPINGDisassemble pump and clean all product contactparts and seal parts prior to first operation.Follow instructions Disassembly for Cleaningand Repair in the MAINTENANCE section ofthis manual. Flush and clean all system pipingand process equipment separately. This willeliminate any foreign material which could haveaccumulated during installation. Plant workerswill also become familiar with pump parts.FINAL PUMP CHECKAfter connecting the piping to pump:• Rotate shaft several times by hand tobe sure that there is no binding and allparts are free.• Check alignment to determine ab-sence of pipe strain. If pipe strainexists, correct piping.Figure 15IMPELLERROTATIONWARNINGTO AVOID SERIOUS INJURY, DO NOTINSTALL OR SERVICE PUMP UNLESSALL POWER IS OFF AND LOCKED OUT.AFTER INSTALLATION AND PRIOR TO FIRST OPERATIONROTATION LABELON MOTORMOTOR |
Related manuals for Waukesha 200 series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine