Wood Stone 4048 Installation And Operation Manual

Contents

Wood Stone 4048 Installation And Operation Manual Manual pdf 22 page image

Designer Series 2 w/ Optional BroilerInstallation and Operation ManualPG 22 OF 24M0079�07 OCTOBER 2017An ongoing program of product improvement mayrequire us to change specifications without notice.WOOD STONE CORPORATION1801 W. Bakerview Rd.Bellingham, WA 98226 USATOLL FREE 800.988.8103TEL 360.650.1111FAX 360.650.1166E-MAIL info@woodstone-corp.comwoodstone-corp.comTROUBLESHOOTING GUIDEPlease contact your local distributor should service be necessary, or if you have any questions about your oven.Controller will not turn onBurner flame does not lightBurner flame cuts outDisplay reads “OPEN”1. Incoming power to oven turned off� Check circuit breaker for circuitsupplying the oven� Check that any wall switches external to the oventhat control oven power are turned on� Check that any interlocks externalto the oven are turned on�2. If Controller still does not turn on, please contact your local distributor forassistance�1. Debris in burner�2. Oven is being run with the night door in place� Night Heat RetentionDoors must be removed whenever the oven is turned on�3. Wind blowing into the oven, or other venting issues�1. Thermocouple is not plugged into control box�2. Damaged thermocouple� Contact your local distributor for assistance�PROBLEM CAUSE/SOLUTION1. Is gas turned on to the oven? Is gas shut-off valve turned all the way on?2. Debris in burner� Burner may require cleaning� Contact Wood Stone forassistance�3. Damaged igniter or gas valve� Contact your local distributor forassistance�If the oven is being started for the first time:- Has all air been bled from the gas line?- Are the switches on the SV-2 & SV-3 valves in the ON position?NOTE: Valves are locate on the back of the control box, beneaththe oven�

/ 24

Related manuals for Wood Stone 4048