Designer Series 2 w/ Optional BroilerInstallation and Operation ManualPG 9 OF 24M0079�07 OCTOBER 2017An ongoing program of product improvement mayrequire us to change specifications without notice.WOOD STONE CORPORATION1801 W. Bakerview Rd.Bellingham, WA 98226 USATOLL FREE 800.988.8103TEL 360.650.1111FAX 360.650.1166E-MAIL info@woodstone-corp.comwoodstone-corp.comDS2-5757 SPECIFICATIONSREV:LEGEND:PART #: WS-DS2-5757-RFG-LRDS2 5757General Arrangement7/21/2016 charleyh 0DWN BY:SHEET:ham, WA 360/650-1111 www.woodstone-corp.comDIMENSIONS ARE IN INCHESLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°UNLESS NOTED OTHERWISEONGOING PROGRAM OF PRODUCT IMPROVEMENTMAY REQUIRE US TO CHANGE SPECIFICATIONSWITHOUT NOTICE.DATE:G1 3/4"40mm75 3/4"1930mm10"250mm30"760mm57"1440mm47 3/4"1210mm32 3/4"830mm50 3/4"1290mm35 3/4"910mm74 1/4"1880mm57"1450mmO 10"250mm66"1680mm9"230mm57"1450mm6 1/2"160mm32 1/4"820mm37"940mm16 1/2"420mm24 1/4"620mmRELEGEND:PART #: WS-DS2-5757-RFG-LRDS2 5757General Arrangement7/21/2016 charleyh 0DWN BY:SHEET:ingham, WA 360/650-1111 www.woodstone-corp.comDIMENSIONS ARE IN INCHESOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°UNLESS NOTED OTHERWISEN ONGOING PROGRAM OF PRODUCT IMPROVEMENTMAY REQUIRE US TO CHANGE SPECIFICATIONSWITHOUT NOTICE.DATE:G1 3/4"40mm75 3/4"1930mm10"250mm30"760mm57"1440mm47 3/4"1210mm32 3/4"830mm50 3/4"1290mm35 3/4"910mm74 1/4"1880mm57"1450mmO 10"250mm66"1680mm9"230mm57"1450mm6 1/2"160mm32 1/4"820mm37"940mm16 1/2"420mm24 1/4"620mmREV:LEGEND:PART #: WS-DS2-5757-RFG-LRDS2 5757General Arrangement7/21/2016 charleyh 0DWN BY:SHEET:ham, WA 360/650-1111 www.woodstone-corp.comDIMENSIONS ARE IN INCHESLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°UNLESS NOTED OTHERWISEONGOING PROGRAM OF PRODUCT IMPROVEMENTMAY REQUIRE US TO CHANGE SPECIFICATIONSWITHOUT NOTICE.DATE:G1 3/4"40mm75 3/4"1930mm10"250mm30"760mm57"1440mm47 3/4"1210mm32 3/4"830mm50 3/4"1290mm35 3/4"910mm74 1/4"1880mm57"1450mmO 10"250mm66"1680mm9"230mm57"1450mm6 1/2"160mm32 1/4"820mm37"940mm16 1/2"420mm24 1/4"620mmPlan viewFront view Side viewAir intake: Do notfacade or cover overMust be leftremovable for serviceUTILITIES SPECIFICATIONSGas3/4 inch FNPT gas inlet110,000 BTU/hr: Radiant Flame Burners34,000 BTU/hr: BroilerMaximum gas inlet pressure:1/2 psi (14 inches W�C�)Electrical120 VAC, 1�2 A, 60 HzOptional: 220 VAC, 1�2A, 50HzOptional: 240 VAC, 1�2 A, 60 HzGas inlet and electrical connectionavailable on either side of oven�Specify at time of order�Refer to the data plate when installing�VentingDesigner Series ovens can be direct connected to a power-ventilated,grease-rated chimney, or can be vented with a Listed Type 1 exhausthood, or one constructed in accordance with NFPA 96 and all relevantlocal and national codes� The oven must be vented in accordance withall relevant local and national codes, and in a manner acceptable to theauthority have jurisdiction�Important: “-W” models must be vented as solid-fuel oven�Models with an in-oven broiler require the Listed Type 1 exhaust hood�