Wood Stone MT. CHUCKANUT WS-MS-4-RFG-IR-W Installation And Operation Manual

Also see for MT. ADAMS WS-MS-5-RFG-IR-W: Installation and operation manual

Wood Stone MT. CHUCKANUT WS-MS-4-RFG-IR-W Installation And Operation Manual Manual pdf 45 page image

Mountain SeriesInstallation and Operation ManualAn ongoing program of product improvement may require us to changespeciflcations without notice� WS-MS-(4,5,6,7)-RFG-IR-W.Revised August 2013info@woodstone-corp.com or visit woodstone-corp.comwood stone corporation1801 w. bakerview rd.bellingham, wa 98226 usatf. 800.988.8103t. 360.650.1111f. 360.650.116645FUELWOOD FACTSWHAT TYPE OF WOOD SHOULD YOU USE TO FIRE YOUR SOLID FUEL COOKING EQUIPMENT?The answer to this question depends on several considerations: geographical location, availability and relative cost of variousfuelwood species and individual preferences regarding the flavor qualities of various wood types� There are a wide variety of goodfuelwood species in all geographic locations� Each species of wood has different characteristics� The table below should help weighthe pros and cons of various types of wood� Wood from conifers (pine trees) is not recommended due to its poor fuelwood charac-teristics (low weight, low-med heat, poor coaling, high sparking and high residual creosote)�Whichever type of wood you use, MAKE SURE YOU KNOW THE MOISTURE CONTENT. Properly seasoned wood contains 20%moisture or less� If wood contains more than 20% moisture, it should not be accepted for use� Wood should be stored off the groundand out of the rain in an environment that allows good air circulation so that the drying process can continue� Wet wood is the mostcommon operational difficulty associated with wood-fired cooking equipment� Wood Stone’s optional Mini-Ligno E Wood MoistureMeter can save you from paying for water when you thought you were paying for wood (see the Tools & Accessories section ofwoodstone-corp.com)�Do not usepressed woodproducts inWood Stone foodservice equip-ment, they maydamage theceramics.*The desirability ofvarious fragrancesis largely a matter ofpersonal preference�Wood Type Heat Lb/Cord Lighting Coaling Sparks Fragrance*Alder Med-Low 2500 Fair Good Moderate SlightApple High-Med 4400 Fair Excellent Few ExcellentAsh High 3500 Fairly Difficult Good-Excellent Few SlightBeech High 3800 Difficult Excellent Few GoodBirch (white) Medium 3000 Easy Good Moderate SlightCherry Medium 2000 Fair Excellent Few ExcellentElm High 2300 Very Difficult Good Very Few FairHickory Very High 4200 Fairly Difficult Excellent Moderate ExcellentMaple (red) High-Med 3200 Fairly Difficult Excellent Few GoodMaple (sugar) High 3700 Difficult Excellent Few GoodMesquite Very High Very Difficult Excellent Many ExcellentOak (live) Very High 4600 Very Difficult Excellent Few FairOak (red) High 3700 Difficult Excellent Few FairOak (white) Very High 4200 Fairly Difficult Excellent Few FairPecan High Fair Good Few GoodCalculate your approximate monthly, daily and hourly fuel-wood costs using the following formulas:The cost of well-seasoned hardwood varies greatly with geographical location�Cost per month = A x C Cost per day = A x C Cost per hour = A x C30 3012 hr dayA = Cost/cord (from wood supplier)B = lb/cord (from above table)C = Cords/mth (from experience, or call Wood Stone for an estimate)When burned, a pound of any wood releases approximately 6500 BTU/hr, so it is better to compare the priceof wood by the pound rather than by the cord� A full cord of wood measures 4' x 4' x 8' when stacked�Cost per lb = AB( )

/ 46

Related manuals for Wood Stone MT. ADAMS WS-MS-5-RFG-IR-W