Wood Stone vashon Installation And Operation Manual

Wood Stone vashon Installation And Operation Manual Manual pdf 13 page image

13an ongoing program of product improvement m ay require us to changespecications without notice. WS-IS-VA-CT, Revised July 2013 Info@woodstone-corp.com or visit woodstone-corp.comwood stone corporation1801 w. bakerview rd.bellingham, wa 98226 usatf. 800.988.8103t. 360.650.1111f. 360.650.1166Vashon Installation and Operation Manualthe PRGM (PRoGRaM) MenUPRoGRaM (PRGM) MenUs: pressing the prgM button on the controller keypad brings up the following fours ubmenus� hit the arrow key to the right of the highlighted option to select it�PRGM / eDIt / PRoDUct: from this screen, you can customize thecharacteristics of each product�• ADD: add a product to a menu category (pg 17)�• DELETE: delete the selected item from a menu category (pg 17)�• CHANGE: change the selected item from a menu category (pg 18)�• ASSIGN: allows you to assign a product to a specific menu category(pg 19)�sUbMenUs UnDeR the PRGM / eDIt / PRoDUct scReenPRGM / eDIt / MenUs: from this screen, you can customize thecharacteristics of each Menu�• ADD: add a new menu category (pg 20)�• DELETE: delete the selected menu category (pg 20)�• RENAME: change the name of the selected menu category (pg 20)�sUbMenUs UnDeR the PRGM / eDIt / MenU scReenPRGM / eDIt: if you have a password set, you will be prompted to enter yourpassword after selecting edit� (enter the password using the circular touchpad, thenpress the save button on the controller keypad circular touchpad�) from this screenyou can choose to edit either product or Menu items�• PRODUCT: the individual food items within a Menu�• MENU: the set of menu categories in the first tier menu� pressing the hoMebutton takes you to the first tier menu screen� each Menu contains a list ofindividual pre-programmed products to choose from�sUbMenUs UnDeR the PRGM / eDIt scReen• EDIT: using edit menus you can revise settings for products and Menus� you will be promptedto enter your password (if one has been assigned) after selecting edit� enter the password usingthe circular touchpad, then press the save button on the controller keypad circular touchpad�• STATUS: this display screen is used primarily for service calls� it is not modifiable (pg 14)�• SERVICE: through service menus you can revise global settings� you will be prompted to enteryour password (if one has been created) after selecting service� see using the service Menusection for more detailed information (pgs 15–16)�• WIPE MODE: disables controller keypad so screen can be wiped clean without activatingbuttons�