Wood Stone vashon Installation And Operation Manual

Wood Stone vashon Installation And Operation Manual Manual pdf 17 page image

17an ongoing program of product improvement m ay require us to changespecications without notice. WS-IS-VA-CT, Revised July 2013 Info@woodstone-corp.com or visit woodstone-corp.comwood stone corporation1801 w. bakerview rd.bellingham, wa 98226 usatf. 800.988.8103t. 360.650.1111f. 360.650.1166Vashon Installation and Operation ManualaDD/Delete a PRoDUct1. you will see naMe on the top of the screen and a highlighted cursor in the first position� use the circular touchpad to scrollthrough numbers and letters to select the first character, then press the enter button� the blinking cursor will advance to thenext character� repeat this process to complete adding the name�2. to adjust the teMperature of the product, press the arrow key to the right of this line on the screen and use the circulartouchpad to adjust the number�3. to adjust the bake tiMe of the product, press the arrow key to the right of this line on the screen and use the circulartouchpad to adjust the number�4. to adjust the broil tiMe (the time at the end of the cooking cycle where additional heat is added from the top heatingelement) of the product, press the arrow key to the right of this line on the screen and use the circular touchpad to adjust thenumber�5. to adjust the broil power of the product, press the arrow key to the right of this line on the screen and use the circulartouchpad to adjust the number�6. press the save button on the controller keypad�aDDInG a PRoDUctDeletInG a PRoDUctpress the prgM (program) button on the controller keypad,then the arrow key next to edit, then the arrow key nextto product, and then the arrow key next to add� you willarrive at the add product screen to add a new product�(Note: after you select edit, you will be prompted to enteryou password, if you have a password assigned� enter thepassword using the circular touchpad, then press the savebutton on the controller keypad to advance the next screen�)press the prgM (program) button on the controller, then thearrow key next to edit, then the arrow key next to product,and then the arrow key next to delete� (Note: after youselect edit, you will be prompted to enter you password, ifyou have a password assigned� enter the password usingthe circular touchpad, then press the save button on thecontroller keypad to advance to the next screen�)use the circular touchpad to scroll through the productsuntil you highlight the product you wish to delete� pressenter in the center of the circular touchpad to delete� thescreen will return to the previous menu� (Note: using thearrow next to product to select it will immediately deletethe product�)