XDrum DD 650 User Manual

Contents

XDrum DD 650 User Manual Manual pdf 16 page image

- Press SETUP button.- Press the PAGE DOWN/UP button until the sub menuADVANCE appears.- Press ENTER button to confirm, then press the PAGEDOWN/UP button to select item of Xtalk.- Strike a pad you desire with maximum strength repeatedlyuntil “OK” is shown on the screen.- Then change to another pad and repeat the third procedure(Not including Hihat Pedal).- Also, you can set the HEADROOM (aka Velocity Dynamicrange) of each pad. To reach a loud sound easier, simplylower the HEADROOM value.- Press EXIT to quit, when “Save Setups” appears, pressENTER to confirm or select No to cancel saving . The dis-play will show “Save OK” after saving.Note： All the system settings in SETUP is globalparameter, they will affect all the kits and can be saved evenwhen rebooted.If the adjustment result is not good, do acrosstalk reset according to next pages.- Make sure the drum kit is stable and all the parts are well locked.- Connect all the cables to the drum module according to their tags.- Connect the multi-trigger connector to its socket at the bottom of the sound module and lock it.- Power the sound module up.BEFORE START PERFORMANCETOM1 ADVXtalk AutoSave SetupsNO YESSETUPBACK VOLUME 50SETUPADVANCE [ENTER]Due to the difference of installation and environment, ifcross talk problem occurs, please follow the followingprocedures.----Save OK ----- - - - - - - - - - - - - - - - - - - -Part to setup12Tip：When you see on screen, you can usePAGE DOWN/UP buttons to move to another option.SNARE-Head ADVXtalk OK