XDrum DD 650 User Manual

Contents

XDrum DD 650 User Manual Manual pdf 21 page image

PedalPedal Vel. 60- Rim Velocity: Rim velocity correction option will appearwhen you strike on the rim or edge parts. The higher thevalue is, the louder it will become. Cymbal edges are alsoincluded in this setting.- Pedal Vel.: Decides the velocity triggered by hi-hat pedal.The higher the value is, the louder Pedal Chick and PedalSplash sounds you get.- Calib: Calibration for the pedal range. Select this option,press down to the floor and then release the pedal slowly.Repeat the procedure several times to get more preciserange and finish the calibration.- Spilt Point: Sets the velocity split point of certain drumpads. If you play the softer than this value, it will triggerone sound. Above that value it will be trigger anothersound.- Chick Time: Defines the trigger disabling time after youpress down the pedal. It can be used to avoid unwantedtriggering after physical contact.- Splash Time: Defines the level of difficulty to triggerPedal Splash(Foot Splash)Note： Some unique settings, such and RimVelocity, Spilt Point.,Pedal Vel., Calib and etc., they will ap-pear only if the matching part is struck. Or you can find themusing DRUM button.Tip： Use DRUM button can switch between trig-gers quickly in SETUP menu.RESET: Restore to factory settings. It is strongly recom-mended to reboot the sound module after reset in completed,in order to avoid some unexpected behavior.Kits: Initialize all the kits, including user kits.Settings: Initialize all system settings.Xtalk: Initialize cross talk to default value.Songs: Initialize all user patterns..All: Initialize everything to factory settings.TOM1-Rim ADVRim Velocity 50PedalCalib 751-3900SETUPRESET KitsSETUP17SNARE-X-StickADVSplit Point 50