|
SNARE-RimVOLUME 80TO SELECT A KIT- Press kit on the control panel and use the scroll wheel or -/+ button to select a kit.Tip：While adjusting parameters, you can changeits value by using -/+ buttons or scroll wheel also.TO EDIT A KIT- Press EDIT to enter EDIT MODE, where you can assigndifferent voices and adjust other parameters to make yourown kit. Strike on different part on each pad to select amongtriggers, or use DRUM button to switch between druminstruments.- Use PAGE DOWN/UP to enter VOICE TYPE menu anduse scroll wheel or -/+ button to choose a voice category.Choose “---” for a blank voice.- Use PAGE DOWN/UP to enter VOICE menu and use scrollwheel or -/+ button to choose a voice within the selectedcategory referring to Voice List in .Tip： The meaning of shortened voice names: Rstands for Rim shot, X for Cross stick, E for Edge, B forBell, C for Close, O for Open, Half for Half Open, P for PedalChick, Sp for Pedal Foot Splash.- Use PAGE DOWN/UP to enter VOLUME menu to adjustthe volume level for a single trigger.- Press EXIT to quit the current menu and select a place tosave it using +/- button. You can either save it to a preset kitor a user kit if you don’t want to overwrite the preset kit.Press ENTER again to confirm or press EXIT to cancel.TO PLAY A DRUM PATTERN (DEMO SONG)- Press PATTERN button, use scroll wheel or -/+ button toselect a demo, and use the play and stop buttons toplay a demo. The display shows information about demo.Voice nameSelect or ChangeBASIC OPERATIONKIT 120 4/4Rock 6Kit No.Kit nameTime signatureTempoSNARE-RimVOICE TYPESNAREVoice categoryPart to editSNARE-RimVOICE Rock RSave Kits toRock----Save OK ----- - - - - - - - - - - - - - - - - - - -SONG 120 4/401 WalkWithTreeSong NumberPlaying status Tempo■Song NameTime Signature13
|
