5-18 – XANTÉ Utilities: Macinstosh and PCUtility PagesThe Utility Pages option allows you to print the following four utility pages:Start Page — prints a page with basic printer information such as the printer’s currentname, resolution, page count, amount of installed RAM, number of resident fonts,EtherTalk and LPR status, and the Ethernet and IP addresses.Low Toner Page — prints a toner reorder form which you can fill out and return toXANTÉ or your XANTÉ vendor.Font List Page — prints a list of the Adobe PostScript 3 fonts resident on yourXANTÉ PostScript 3 printer.Font Sample Page — prints samples of Adobe PostScript 3 fonts resident on yourXANTÉ PostScript 3 printer.1. Go to the printer home page (fig. 5.7). See “Printer Home Page” earlier in thischapter for details.2. Select Utility Pages under Options (fig. 5.8). The Utilities Pages windowappears (fig. 5.27).Fig. 5.27 Utilities Pages Window3. Select Print to the right of the utility page you wish to print (Startup Page, LowToner Page, Font List Page, or Font Sample Page). Depending on the selectedpage, printing takes approximately 6 to 20 seconds.4. Close your browser.CD-ROM PostScript Files and Programs: Feature AccessYou can access and control many printer features via programs and PostScript files onthe XANTÉ Utilities CD-ROM that comes with your printer. For example, you canuse PostScript files to set your printer’s EtherTalk zone name, control startup pageprinting, or initialize an internal hard disk.
