4-6 – TCP/IP ConfigurationSet the TCP/IP AddressYour printer’s default TCP/IP address should be changed to agree with your network’sTCP/IP addresses. Change it using the XANTÉ Utilities TCP/IP Address optionavailable through your browser or the Setip.ps file included on the XANTÉ CD-ROM.Check with your System Supervisor for the correct TCP/IP address.See “PS Files Folder” in chapter 2 (Macintosh) or “PS_Files Folder” in chapter 3 (PC)for details on the Setip.ps file. See “I/O Configuration (EtherTalk and Network)” inchapter 5 for details on using the address option via your browser.Using the Utilities via the Browser (Macintosh and PC)1. Turn on your printer and then the computer.2. Open your browser, and enter the IP address that appears on your printer’sstartup page. The Printer Home Page window for your printer appears (fig.4.2).Fig. 4.2 Printer Home Page Fig. 4.3 I/O Settings Window3. Select Printer Configuration: I/O Configuration. The I/O Settings Windowappears (fig. 4.3).4. Select Network. The Network Configuration window appears (fig. 4.4)Fig. 4.4 Network Configuration Window
