2-18 – Macintosh: Installing Utilities and DriversQuarkXPress 4.X uses your printer’s PPD file (it does not need a PDF). To load a PPD filemanually, copy your printer’s PPD from the CD-ROM’s Printer Descriptions folder to theSystem Folder: Extensions: Printer Descriptions folder on your Macintosh.Remove “Balloon Help” from the Quark folder for QuarkXPress 3.3.2.ScenicSoft Preps FolderThe XanteInstallers: App Drivers: ScenicSoft Preps folder contains PPD and PDX filesfor your printer. Print Install installs these files automatically if you have theScenicSoft Preps application on your system.Configuring the PPD1. Select Chooser from the Apple menu. The Chooser window appears (fig. 2.38).Fig. 2.38 AdobePS Chooser Window2. Select AdobePS from the box on the left (top left in a network environment); alist of available printers appears to the right.If the printer does not appear in the list, verify that• the printer is on and cable connections are secure• EtherTalk is enabled on the printer and EtherTalk protocol is selected (see“Configuring EtherTalk” later in this chapter).• your Macintosh is setup for EtherTalk in the AppleTalk Control panel.3. Highlight your printer and click Create. If the setup reminder dialog boxappears, click OK. The Adobe PostScript printer driver automatically selectsand configures the correct PPD for your printer.If multiple PPDs are installed for your printer, select the correct PPD when prompted.
