170 Chapter 4 Logical Printer Setup and Operation (6030/6050 only)Printing Long DocumentsThe media cut mode can be set to either the standard A0 format (1,189 mm), thestandard shape increased in length, or the synchronized cut.This parameter is set up using the logical printer [Output Option] feature.[AUTO] : The standard shape priority mode. If the length of the documentexceeds the standard size, the paper is cut to the standard shapethat has been increased in length.[OTHER] : Synchronized cuts performed on all images.[MIX] : If images that are smaller than the A0 size exceed the standard size,the paper is cut to the standard size that has been increased inlength. Synchronized cuts are performed on all images that exceedthe A0 size.[MIX2] : If images that are smaller than the A0 size exceed the standard size,synchronized cuts are performed on all images.• Synchronized cutting is when the length of the print is cut to the non-standard size that matches the length of the image.• All output is carried out on roll media when [OTHER] has been selected. Cutsheet cannot be used.Input image that is longerthat the standard sizeOutput imageIn the case of [AUTO]Output in a size thatis the standard shapeincreased in integers.In the case of [OTHER]The same size as theinput image is output.
