Problems during PrintingXerox 6204 Wide Format Solution 193Problem Solving10Problems during PrintingThe following helps you solve problems encountered during printing.Symptoms Check RemedyUnable to print. Is the machine’s circuitbreaker or power switch off?Turn on the circuit breaker (main powerswitch) and the power switch.Refer to "Powering the System On/Off" (P.28).Is the printer [Offline]? Press the button, andconfirm that the printer is online. If [PrintMode] is [Offline], select [Online] in the[Print Mode] screen.Is the network cabledisconnected?Connect the network cable.Does an error occur in themachine?Check the error message, and follow theinstructions to solve the problem.Is the IP address set upcorrectly?Correctly set up the IP address.Is an interrupt operationbeing performed?Cancel the interrupt operation.Unable to printusing the manualfeed tray(Bypass).Is the specified size medialoaded correctly?Load the correct size media according tothe message that appears, and then printagain.Refer to "Using the Manual Feed Tray(Bypass)" (P.39).Media often jamsor is wrinkled.Is the correct type of mediabeing used?Load a correct type of media.Refer to "Media Type" (P.35).Is the media loadedcorrectly?Load the media correctly.Refer to "Loading Media" (P.37).Is the media tray setcorrectly?Firmly push in the media tray until it stops.Refer to "Loading Media" (P.37).Is the media damp? Replace with new media.Refer to "Loading Media" (P.37).Do the media size seriesand the media type settingsmatch the media loaded inthe machine?Select the media size series and the mediatype that match the media that is loaded inthe machine.Refer to "Media Settings" (P.42).Are there torn pieces ofmedia or foreign objects inthe machine?Open the door of the machine or slide outthe media tray to remove the torn media orforeign objects.Refer to "Paper Jams" (P.199), "LoadingMedia" (P.37).The prints aretoo light.Is the load toner messagedisplayed?Load toner.Refer to "Loading Toner" (P.177).Is the toner densityappropriate?Adjust the toner density using Web PrintManagement Tool.
