Xerox 6204 Copy/scan Operation Manual

Also see for Wide Format 6204: User guide User guide Setup guide User guide Release note

Contents

Xerox 6204 Copy/scan Operation Manual Manual pdf 37 page image

Powering the System On/OffXerox 6204 Wide Format Solution 29Product Overview2Exiting the Power Saver ModeThe Power Saver mode may be exited either manually or automatically.Manual Method: With the machine in the PowerSaver mode, press the illuminated Saver> button. The button’s indicator light willextinguish, the touch screen will display themessage Warming Up, and the machine willbegin its warm up cycle.Automatic Method: The machine will exit thePower Saver mode when it detects a print job inthe active queue.System Power On ProcedureThe procedure below describes the process for powering up the system from a coldstart, that is, it assumes that both the printer and the controller are powered downcompletely.1 Move the printer circuit breaker switch up, to theOn [ | ] position.2 Move the printer power switch to the On [ | ]position.3 Press the power button on the front of thecontroller.The power button lamp will illuminate. After about one-half minute, the control panel will display the messagePrinter Warming Up. The machine will be print-readyin about three minutes.2 Power Switch1 Circuit Breaker3 Power Button