Scanning OverviewXerox 6204 Wide Format Solution 81Scan4Scanning OverviewThis section describes the scanning procedure, and assumes that a mailbox hasalready been set up. Listed below are the steps involved in the scanning process.Step 1 Selecting a Mailbox ............................................................................................................... 81Step 2 Selecting Features ................................................................................................................ 82Step 3 Scanning the Document........................................................................................................ 83Step 4 Importing Scanned Data ....................................................................................................... 84Step 1 Selecting a MailboxYou must specify the destination of the scanned image data before scanning can begin.1 Press the button.Note: You also can display the [Scan] screen by selecting[Scan] on the [Menu] screen.The [Scan] screen will display.2 Select [Destination].The [Destination] screen will display.3 Either select an existing mailbox or create a newmailbox to store the image file(s).In the example at the right, mailbox 01 is set upalready, while mailboxes 02 - 05 are not in use.Note: Refer to "Creating a Mailbox" (P.104) to learn how toset up a new mailbox.Note: You may select [ ] to display the previous screen or[ ] to display the next screen. You also can accessa mailbox by entering its two-digit number in [Go to],using the numeric keypad, and then selecting [Go].
