Xerox 6204 Wide Format Solution Participant Guide3112 Making Manual Feed CopiesObjectivesUpon completion of this module, you will be able to:• Set up and run a copy using the Manual Feed Tray (BypassFeeder)Reading ActivityRead the following section in the User Guide before setting up andrunning the copy.3 Copy: Making Copies using the Manual Feed Tray (Bypass)Resources Required Two sheets of 12” x 18” (B/A3) 20 pound bond paper One 12” x 18” originalManual Feed ActivityIn this activity you will make two copies using the Manual Feed Trayas the media source.Refer to 3 Copy – Making Copies using the Manual Feed Tray(Bypass) in the User Guide as you perform the activity.1. On the [Basic Copy] tab, press the Sheet button under theMedia Source heading.2. Press the <Original/Media Settings> button on the ControlPanel.3. Select the [Media Settings] tab.4. Under the Size Series heading, select the Manual button.5. On the [Manual Size Series] screen, select the button besidethe ARCH-1 settings (36”, 24”, etc.), and then press Save.6. Under the Type Thick. Heading, select the Manual button.7. On the [Manual Media Type/Thickness] screen, select Bondand Ordinary, then select Save.8. Press the Close button on the [Media Settings] tab to return tothe [Copy] screen.9. Leave the R/E setting at 100%.10. Although you can copy just one sheet at a time using theManual Feed Tray, set the Quantity to 2 using the numerickeypad.
