Web Print Manager Tool User Guide Page 43TIFF PageNavigation: PRINTER DEFAULTS > EMULATIONS > TIFFIf you entered the printer password in the Session Setup, you can change the followingdefault TIFF plot parameters in the printer:1. 1 Bit Photo - Click on this list box to select FILE CONTROL or IGNORE MIN=BLACK.2. Press the Update Printer button to update the specified parameter changes in theprinter.PostScript PageNavigation: PRINTER DEFAULTS > EMULATIONS > PostScriptIf you entered the printer password in the Session Setup, you can change the followingdefault PostScript plot parameter in the printer:1. Default Media - Click on this list box to view and select the default media sizeexpected by PostScript.2. Postscript Halftone Method (for Color Printers only) - Click o n this list box to selectHalftone Screening or Error Diffusion.Halftone Screen renders images with a standard printing press appearance. This isthe factory default setting.Error Diffusion renders images with more of a continuous tone (photographicappearance). Note that error diffused images, which are computationally intensive,take considerably longer to process.3. EPS Enabled – Select the checkbox to enable the PostScript interpreter in to searchfor and handle the Encapsulated PostScript (EPS) commands when processing thefile.4. Use CIE Color - If a color printer is attached, selecting this feature will produce vibrantcolors for Auto or Graphic document types. For Lines and Text document types, thecolors will look more saturated (bold). For Photo document types, the colors will looktruer to the original photograph. ("Document Type" is selected on the ProcessingDefault > Rendering screen.) This feature works by converting incoming colorinformation to CIE color, then back to CMYK or Gray through a Color Renderingdictionary.5. PDF Optimization - This feature is selected by default to control some "behind thescenes" processing inside the PostScript rendering path. If you have problems printinga PDF file, unselect this feature to see if it fixes the issue.6. Press the Update Printer button to update the specified parameter in the printer.NOTE: This option requires a PostScript license.