Xerox 850DP - Phaser Color Solid Ink Printer User Manual

Also see for 850DP - Phaser Color Solid Ink Printer: Specifications Operator's manual Operator's manual System introduction Operator's manual

Contents

Xerox 850DP - Phaser Color Solid Ink Printer User Manual Manual pdf 47 page image

Web Print Manager Tool User Guide Page 47on the WIDE FORMAT PRINT SYSTEM 8855 is 1600.2 cm or 630 inches. Themaximum length on the WIDE FORMAT PRINT SYSTEM 721P is 2400 cm or 945inches.10. Mismatch Queue - Click on this check box to enable/disable mismatch queuing.When a media mismatch occurs, and this box is not checked, the Status column of theJob Queue List will display Mismatch/Blocked, and printing will pause until thenecessary medium is installed or the job is cancelled. When a media mismatch occurs,and this box is checked, the Status column of the Job Queue list will displayMismatch/Queued. In this case, pages requiring the missing medium are not printed,but pages requiring media which are currently installed will be printed.11. Press the Update Printer button to update the default media parameters in the printer.Media Mismatch Mode1. Select PRINTER DEFAULTS > PROCESSING DEFAULTS > Media to display theMedia page.2. Click on the Media Specific Settings list box to select a media type.3. Press the Adjust Settings (Text Form), or Adjust Settings (Graphical UI) button togo to the Media Specific Settings page.4. Media Mismatch Mode - Select the QUERY mode if you want the printer to promptthe operator at the printer control panel to install the appropriate media size. Formonochrome printers, select the SUBSTITUTE mode if you want the printer to makemedia type substitutions as necessary to print the page. Select the SCALING mode ifyou want the printer to automatically scale to the nearest available media size of thesame media type.5. Press the Update Printer button.Media Color Settings (only for color inkjet printers)Media Color Settings can be adjusted for you to get your expected printed color.Ink Limit is used to change the maximum amount of ink used in printing. Valid values forInk Limit are 1% to 100%.Gamma is used to adjust the entire color curve without moving the endpoints of the curve.This adjusts the mid tones (higher gamma produces darker mid tones), with minimal effecton shadows and highlights. Valid values for Output Gamma are 0.5 to 2.2.1. On the Media Page, select the media type in the Media Specific Settings section.If you have a Java plug-in installed(http://java.sun.com/products/archive/j2se/1.4.0/index.html), or if you have permissions toinstall it for your browser, then select the Adjust Settings (Graphical UI) button. If not,press the Adjust Settings (Text Form) button. If you did not have the Java plug-ininstalled and you selected the Graphical UI, then it will attempt to install itself (it getsdownloaded from the Sun web site, so you will need internet access for this). You shouldfollow the instructions on-screen in order to install the plug-in.2. If you are on the Media Specific Settings Graphical UI page, do the following. If you areon the Text Form page, go to the next section.