9 Using CentreWare Internet Services64Using CentreWare Internet Services9TCP/IPThis section describes the settings for TCP/IP.1 Start a web browser.2 Enter the machine's IP address or the Internet address to the address entry column onthe browser, and press the “Enter” key.z Example of the IP address entryhttp://192.168.1.1/z Example of the Internet address entryhttp://xxx.yyyy.zz.vvv/Note • When specifying a port number, add “:” and a port number to the end of the Internet address.3 Click the [Properties] tab.4 Click [+] on the left of [Protocol Settings] to display the items in the folder.5 Click [TCP/IP].6 Set [Host Name].7 Select how to obtain an IP address from the [Get IP Address] pull-down menu.8 Set [IP Address].Note • This item is not necessary if either [DHCP], [BOOTP], [RARP], or [DHCP/Autonet] has beenselected from the [Get IP Address] pull-down menu.9 Set [Subnet Mask] and [Gateway Address].Note • This item is not necessary if either [DHCP], [BOOTP], [RARP], or [DHCP/Autonet] has beenselected from the [Get IP Address] pull-down menu.10 Set the DNS information.1) Select the [DHCP] check box if using DHCP for [Get DNS Address].2) Set [DNS Address 1 - 3].Note • This item is not necessary if [DHCP] has been specified for [Method to Get the DNSAddress].3) Set [DNS Name].4) Select the [On] check box when using [Generate Domain Search ListAutomatically].