7–6 P R I N T E R M A I N T E N A N C EMaking an AdjustmentContinue the process that you began in Step 6 (Printing a Test Page).When you print the Test Page, the message iscleared and the menu is displayed in the MessageDisplay7. Press the Next button to cycle through the menu choices until thefeature you wish to adjust is displayed.8. Press Enter to select the adjustment you desire to make. The firstnumber in the range of choices will be displayed9. Press Next until the number you have chosen as your desired settingis displayed.10. Press Enter to select the number.11. You will be asked to confirm your desire to make the change. PressEnter . Press Next to display your response. Press Enter.NO will abort the adjustment and return you to the next item inthe COLOR ADJUST menu.YES will incorporate your new values and another Test Page willbe printed.12. Repeat Steps 9-13 until the “CURRENT” images appear as you wantthem to be.NOTE: You can only make one adjustment in between prints. Thenumbers in the boxes and circle are always in the same place. Only thevalues change from test print to test print.15. To complete your adjustment press Next until CHANGES> is displayed16. Press Enter to accept the current settings and return to the next itemin the SETUP MENU.
