Copy OptionsColorQube™ 9301/9302/9303Copy14• 2>2 Sided use this option if you want to make two sided copies from two-sided originals. You canalso select the Rotate Side 2 button to have the second page rotated 180 o .• 2>1 Sided this option will make one-sided copies from two-sided originals.Note If using the document glass to scan originals, the device displays a message when ready toscan side 2.Copy OutputThe most commonly used Copy Output options are selected directly from the Copy tab. The optionsavailable are dependent on the finishing device and kits installed. Refer to Finishing Devices onpage 17.• Collated sorts your copies into sets1,2,3 1,2,3 1,2,3.• Uncollated sorts your copies intostacks 1,1,1 2,2,2 3,3,3.• 1 Staple (Portrait) staple will bepositioned in one of the short edgecorners depending on how theoriginals are loaded.• 1 Staple (Landscape) the staple willbe positioned in one of the long edgecorners, depending on how theoriginals are loaded.• Folding a new window opens providing access to the folding options. Refer to Folding on page 15.• Use More... to access additional output options.For information about the Staple options, refer to Stapling Options on page 14.For information about Hole Punch options, refer to Hole Punching on page 15.Stapling OptionsThe stapling options available are dependent on the finishing device available and the configurationsetup. For information about the available finishing devices, refer to Finishing Devices on page 17.• 1 Staple when this option is selected,a single staple is positioned in the topleft corner of the output.• 2 Staple when this option is selected,two staples are positioned parallel tothe left or top edge of the copies.• Multi-Staple when this option isselected, depending on the size ofyour copy paper, either three or fourstaples will be positioned parallel tothe left edge or your copies. Forexample:• 4 Staples = A4 LEF, A3, 8.5x11” LEF, 11x17”, 8x10” LEF.
