Media TypesColorQube™ 9301/9302/9303Paper and Media249LabelsLabels consist of three layers, the facesheet, pressure sensitive adhesive and thebacking or release sheet. The devicesupports labels that have been designedfor laser and solid ink devices, such asXerox Labels. The adhesives are designedto withstand the higher temperatures ofthese devices without bleeding andcausing spotting or damage to the internalcomponents.Note Dry gum labels (those thatrequire moistening before being applied) can cause dry particles of glue to detach from thebacking and should not be used.The labels should be left in the printing environment overnight before using it in the printer to allow itto adjust to the ambient temperature.• Load labels face up and with the top towards the front of the device in Trays 1 and 2.• Load labels face down and with the top towards the front of the device in Tray 4 (Bypass).Note Do not fan the label sheets before use unless the package instructs you to do so. If jammingor multi-sheet feeding occurs shuffle the labels before loading.Heavyweight and Extra HeavyweightUse this paper type for feeding heavyweight and card. The maximum weight which can be fed is216 gsm (56 lb).Pre-Cut TabsTabs are used as dividers in documents. Your device can accommodate tabs with 1 to 10 tabs andweights of up to 200 gsm (53 lb).• Do not use tabs with bent corners.They can cause feeding relatedproblems. If a tab is bent, remove itfrom the set and replace it with anundamaged tab in the same position.• Tabs can only be loaded into Tray 4(Bypass).• The tabs must be loaded with the tab1 on the top, with the tab to the left.• Use the Special Pages, Inserts optionin Copy or the Printer Driver toprogram inserts where the tabs are required. Refer to the Copy or Print guide for information.
