Device SettingsColorQube™ 9301/9302/9303Administration and Accounting275Paper SubstitutionEnables the device to automaticallysubstitute common US and metric papersizes when printing.• Nearest Match is used toautomatically substitute the papersizes shown on the screen if they arenot available e.g. if an A4 document isreceived for printing and only 8.5x11"paper is available, the devicesubstitutes 8.5x11" for A4. If Disableis selected the device does notsubstitute the sizes shown. In thisinstance, a job would be held in the job list until the correct paper size is loaded.• Replace 8.5 x 14” is used to automatically substitute 8.5x14” paper with A3 or 11x17” if 8.5x14”paper is requested but is not available. If Disable is selected the device does not substitute thepaper.Paper Size PreferenceThis option is used to select the most frequently used paper size formats.• Inches for formats such as 8.5x11” or 11x17”.• Metric for formats such as A4 or A3.Tray SettingsUse to apply attributes to each paper trayso they operate productively in your ownworking environment. You can assign traysas dedicated to a specific paper size andtype, and setup Auto Selection and theselection Priority of each tray.• Select the tray required and selectChange Settings.• Select the Tray Type required:• Dedicated is set to contain onesize and type of media only andcannot be adjusted by the user.• Adjustable is selected if the tray can be adjusted by the user to contain any media withinspecification. This option may not be available for all trays.• Select the setting required and select Save.• Priority is used to indicate which tray is selected if trays contain the same media, it alsodetermines in which order the trays are displayed on the Copy tab. Set the Tray Priority between 1- 99. 1 is the highest priority and 99 is the lowest. Select Save.
