Scan OptionsXerox CopyCentre/WorkCentre/WorkCentre Pro 123/128133 User Guide 127Mixed Size OriginalsThis feature allows you to scan mixed sizes of documents using the document feederat the same time and save them in a single file.NOTE: To enable the feature, select [Auto Size Detect] on the [Scan Size] screen.1. Select [Mixed Size Originals] onthe [Scan Options] screen.2. Select [On] to enable thefeature.3. Select [Save].Border EraseWhen scanning bound documents or scanning with the document feeder or documentglass cover open, black marks may appear around the edges or on the center bindingarea of the output. These marks can be erased using this feature.1. Select [Border Erase] on the[Scan Options] screen.2. Perform the necessaryoperations.3. Select [Save].NormalUses the default values for the edge or center area to be erased. The default valuesare set in [Variable Erase]. If you do not want to erase any edge and/or center area,select [Variable Erase] and then select 0.0 using the scroll buttons.Variable EraseAllows you to adjust the edge or center area to be erased. Enter the amount you wantto erase from the top, bottom, right, left, and center margins. Up to 50 mm (2 inches)can be entered.Original Orientation• Head to Top – Select to position documents with the head of the document awayfrom the operator.• Head to Left – Select to position documents with the head of the document to theoperator’s left. For this orientation, documents are scanned so that the head ofscanned result is away from the operator.
