11 Setups214 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User GuideAuto Eject TimeSpecify the time-out period when print data is not sent to the machine sequentially. Ifthe specified time elapses, the remaining data inside the machine is automaticallyprinted out. You can enter a time within the range of 5–1,275 seconds in 5-secondincrements.Adobe Communication ProtocolSpecify the communication protocol format for Adobe Communication Protocol.• Standard – Select this option when the communication protocol is in the ASCIIformat.• Binary – Select this option when the communication protocol is in the binary format.Depending on the data, the print job may be completed faster than [Standard].• TBCP – Select this option to switch the specific control codes when thecommunication protocols involve both ASCII and binary formats.LPDUse this feature to specify whether to enable the LPD port.NetWareUse this feature to specify whether to enable the NetWare port.SMBUse this feature to specify whether to enable the SMB port.IPPUse this feature to specify whether to enable the IPP port.EtherTalkUse this feature to specify whether to enable the EtherTalk port.SalutationUse this feature to specify whether to enable the Salutation port. This setting item isavailable only when the hard disk is installed on the machine.Port9100Use this feature to specify whether to enable the Port9100 port.SNMPUse this feature to specify whether to enable the SNMP agent.FTP ClientUse this feature to specify whether to enable the FTP Client port. This setting item isavailable only when the hard disk is installed on the machine.
