11 Setups206 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User GuideThe preset values of the [Reduce/Enlarge Presets] can be changed. For moreinformation, refer to Reduce/Enlarge Presets on page 210.Copy DefaultsUse this feature to set the default for each copy feature. The default set here returnswhen the power is switched on, power save mode is cancelled, or the button is pressed. If you set a default for the features you frequently use, you canquickly copy documents without changing the settings each time.The [Copy Defaults] screen consists of multiple pages.1. Select [Copy Defaults] on the[Copy Mode Settings] screen.2. Use the scroll buttons to switchbetween screens.3. Perform the necessaryoperations.4. Select [Close].Paper SupplySets the default for the [Paper Supply] feature on the [Basic Copying] screen.NOTE: If the default for [Reduce/Enlarge] is set to [Auto %], [Auto] cannot be selectedfor [Paper Supply].Reduce/EnlargeSets the default for the [Reduce/Enlarge] feature on the [Basic Copying] screen.NOTE: If the default for [Paper Supply] is set to [Auto], [Auto %] cannot be selected for[Reduce/Enlarge].The preset values of the [Reduce/Enlarge Presets] can be changed. For moreinformation, refer to Reduce/Enlarge Presets on page 210.Original TypeSets the default for the [Original Type] feature on the [Image Quality] screen.Lighten/DarkenSets the default for the [Lighten/Darken] feature on the [Image Quality] screen.SharpnessSets the default for the [Sharpness] feature on the [Image Quality] screen.Auto ExposureSets the default for the [Auto Exposure] feature on the [Image Quality] screen.
