Xerox Digital copier printers User Manual

Also see for Phaser 750DP: Getting started Reference guide Administrator's guide Service manual Manual

Contents

Xerox Digital copier printers User Manual Manual pdf 32 page image

33-1 Printing to the Fiery SIThe Fiery SI enables you to print from an IBM PC-compatible computer connected tothe Fiery SI. This section describes how to print to the Fiery SI from Windows.For information on setting up the Windows environment for printing with Windowsservers connected to the Fiery SI, see the Administrator Guide. For information on howto connect to the Fiery SI over the network, install printer drivers, and install theFiery SI utilities, see Getting Started.Printing to the Fiery SIYou can print files directly to the Fiery SI from within your Windows application. Ifyou plan to print files at another location, you should follow the procedures describedin “Saving files to print at a remote location.” You can print from a PC connected tothe parallel port on the Fiery SI. This PC can also be a Novell server.Printing from applicationsOnce you have installed the Fiery SI printer driver and set it to the proper port asdescribed in Getting Started, you should be able to print directly from most Windowsapplications. Simply choose the Print command from within your application.Saving files to print at a remote locationIf you do not have a Fiery SI and are preparing files to take to a service bureau or otherlocation, you should print your final files to the File port. You can also print to the Fileport to create a file to be downloaded with the Fiery XJ Downloader.Printing to the parallel portThe Fiery SI has a parallel port that enables you to print most files directly from a PCif your network administrator has connected the PC’s parallel port to the Fiery SIparallel port.N OTE : You cannot use the Fiery SI utilities through the parallel port.Chapter 3:Printing withPC-CompatibleComputers