SUBMITTING PRINT JOBS USING WINDOWS NT 4.0 DRIVERSGUIDE TO SUBMITTING JOBS FROM THE CLIENT 5-17Setting the image shiftYou can use the Image Shift option to offset the printed image fromthe edges of the page. This is particularly useful for bound or drilledjobs. The image shift setting is applied automatically to both sides ofthe print for two-sided printing. When the Image Shift option is setat 0 (zero), the image is not shifted in any direction.1. From the DocuPrint NPS Setup window, set the unit of measureby selecting the Preferences icon. Refer to the section “Settingthe preferences” for more information.2. To specify a horizontal image shift, enter the number of units toshift the image from the left edge of the page in the X text box.A positive number shifts the image to the right, and a negativenumber shifts the image to the left.3. To specify a vertical image shift, enter the number of units toshift the image from the top edge of the page in the Y text box.A positive number shifts the image up, and a negative numbershifts the image down.Note: An image shift set with the Image Shift option may interferewith any binding offset set in the document file by the application.Specifying the paper weightOn the Paper Stocks window, enter the number of grams per squaremeter in the [Weight] box. You can enter a number in the range 60 to413. The default is 75 g/m2 .Programming the Main Stock (Stock 1)This area allows you to specify the paper type, size and color. Referto the section “Specifying paper stocks” for detail.Selecting the finishing featuresThe finishing features that are available on your printer determine theformat of the completed print job. DocuPrint always collates thepages of a document in sequential order unless “no collating” optionsare selected.1. From the DocuPrint NPS Setup window, click the [Finishing] listbox.2. Click the option you want to use.Note: [No Finishing] indicates that the document is not boundor stapled.
