SUBMITTING PRINT JOBS USING WINDOWS NT 4.0 DRIVERS5-22 GUIDE TO SUBMITTING JOBS FROM THE CLIENTFor models 96, 4635 and 180 NPS:• [Precut Tab] selects the number of tabs per set. The defaultis a 3-cut tab.• [Full Cut Tab] selects one tab per set, which runs downalong the side edge.Selecting the paper stock colorFollow these steps to select the paper stock color:1. On the Paper Stocks window, click the [Color] list box.2. Click the color you want to use.If you click [Custom], enter the custom color name of the stockin the text box (up to 27 characters).Selecting drilled stockTo use drilled paper for your print jobs, click the [Drilled] check box inthe Paper Stocks window.Specifying Special PagesYou can use the Special Pages dialog to specify paper stock for anypages or range of pages in the print job. For example, you may wantto print a page or range of pages on transparency stock.If you specify overlapping page ranges, the system automaticallyconsolidates the information for you. For example, you may havespecified blue stock for pages 1 through 50 of a document. If you laterdefine a page range of 5 through 10 using green stock, the systemwill show the following information in the Special Pages List:The Special Pages dialog includes a Stocks... icon that providesaccess to the Paper Stocks dialog. This dialog can remain open whileyou are programming the Special Pages, and you can toggle backand forth between the dialogs. See “Specifying paper stocks” formore information about using the Paper Stocks dialog.Pages Stock1: 4 1 (for blue stock)5: 10 2 (for green stock)11: 50 1 (for blue stock)
