SUBMITTING PRINT JOBS USING WINDOWS NT 4.0 DRIVERSGUIDE TO SUBMITTING JOBS FROM THE CLIENT 5-21Selecting the paper stock sizeNote: Unless you explicitly want to print a smaller image on a largersheet of paper, or a larger image on a smaller sheet of paper, makesure that the paper size in the application matches the paper size inthe job ticket.Follow these steps to select the paper stock size:1. On the Paper Stocks window, click the [Size] list box.2. Select the size you want to use.If you click [Custom], enter the required size in the [Width] and[Length] text boxes, or use the spin button to increase ordecrease the value in the text box. The size you specify mustfall within the ranges indicated below.For models 4050/4090/4850/4890/92C NPS:• Width ranges from 8.0 to 8.5 inches (203 to 216 mm)• Length ranges from 10.0 to 14.33 inches (254 to 364 mm)For models 96/4635/180 NPS:• Width ranges from 7.00 to 18.25 inches (178 to 464 mm)• Length ranges from 10.0 to 14.33 inches (254 to 364 mm)You can change the unit of measure using the Preferences... icon.See “Setting the preferences” for more information.Selecting the paper stock typeFollow these steps to select the paper stock type:1. On the Paper Stocks window, click the [Type] list box.2. Click the type you want to use:• [Standard] selects opaque, medium-weight paper.• [Transparency] selects plastic sheets (up to 9 inches wide).• [Custom] selects any special paper type that is not listed.Enter the name of the paper type in the Custom Selectiondialog (up to 27 characters).Note: Specifying “plain” as a custom paper type will resultin a blank Media Type on the NPS Controller.With models 96, 4635 and 180 NPS, you may utilizeordered stocks, by clicking [Ordered], then specifying up to255 items.
