GUIDE TO SUBMITTING JOBS FROM THE CLIENT 2-12. 2Setting up workstationsThis chapter describes how to prepare your DOS, Macintosh, andUNIX workstations to work with DocuPrint. It includes procedures forinstalling and removing Xerox Client Software (print command).Before you complete the tasks in this chapter:• Verify that at least 850KB of disk space is available on the clientworkstation. The Xerox Client Software package requiresapproximately 450 to 550KB, and temporary files and thedirectory structure require another 200 to 300KB.• Verify the connections between the Printer Controller and theclient workstation.• Set the default media for the printer (Set Default Mediacommand).• Set the printer’s paper trays (Set Tray command).• Start printing and queueing on the Printer Controller (Start Allcommand).• Ensure that the networking communication package for yourclient platform is properly installed and running.Setting up PC-DOS workstationsThis section describes the steps for installing the Xerox DocumentSubmission Client Software, the appropriate PPD (PostScript PrinterDescription) file, and the Decomposition Service Tools on anetworked PC-DOS workstation.In order for jobs submitted by Xerox Client software to print, Xerox jobticket processing must be enabled. This is specified duringinstallation or by using the Configure utility. Also, in order todownload the client software, FTP capability must be enabled on thecontroller. This is specified during installation or via the Configureutility. If security is a concern, FTP capability can be disabled afterthe software is downloaded by using Configure. For moreinformation, see the chapter “Using utility commands” in your Guideto Configuring and Managing the System.
