Xerox Document Centre Network Installation & Troubleshooting Guide Page 20 - 3Scan Setup withoutCentreWareScan Setup withoutCentreWareWho Should Use This GuideThis chapter is a companion to the Network Scanning ServicesGuide and is intended to be used by System Administrators who aresetting up network scanning without using CentreWare NetworkScanning Services. CentreWare Network Scanning Services isintended for use on Windows based workstations.There are two other options for setting up scanning services:• Setting up Native Scanning• Setting up Scanning Using CentreWare Internet ServicesBoth of these set up options require the use of procedures in thisguide. For Setting up Scanning Using CentreWare InternetServices, you will need to complete some processes here, and thenrefer to the Internet Services Guide to complete the set up. All ofthe procedures for setting up Native Scanning are included here.Whether you are setting up Native Scanning or Scanning UsingCentreWare Internet Services, there are two options for file transfer.They are:• Setting Up Scanning - NetWare (NCP)• Setting Up Scanning - FTP (File Transfer Protocol)Procedures for both of these file transfer options are contained inthis guide.NOTE If you will be using Xerox’s CentreWare Network ScanningServices to set up scanning on the Document Centre, refer to theNetwork Scanning Services Guide guide now.To use the procedures in this guide effectively, you must haveexperience working in a network environment. You must also haveaccess to the network and possess Supervisor (Administrator) rights.You may also require documentation provided by network andclient workstation vendors.
