Page 20 - 18 Xerox Document Centre Network Installation & Troubleshooting GuideSet Up OptionsThere are two procedures that can be used to successfully set upscanning. Read the information below and choose the procedurethat you will use to complete the installation:• Set Up ScanningTo complete the native implementation of scanning for yourNetWare environment, go to the section of this chapter titled SetUp Scanning now.• Use Xerox CentreWare Internet ServicesXerox’s CentreWare Internet Services is accessed through theembedded HTTP server on the Document Centre that allowsSystem Administrators and users to configure scan settings.This is accomplished by using an Internet browser such asNetScape (version 3.x or later) or Microsoft Internet Explorer(version 4.x or later).Using Internet Services, you can:• Create new scan templates• Update existing scan templates• Modify scan configurations (including document repositorylocations), enable and disable Confirmation Sheets, andchange Filing Protocols.• Enable Multi-Page TIFF, which will create a single TIFF filefor a multi-page document, instead of one TIFF file for eachpageOutput Image Quality• Multi-Page TIFF can be enabled using Xerox CentreWareInternet Services. When Multi-Page TIFF is enabled, a sin-gle TIFF file will be created for a multi-page document.This single TIFF file will contain all the pages of the docu-ment. An .XSM folder is not created when scanning in theMulti-Page TIFF mode. A single TIFF file and a log file(.xst) are stored in the repository for each multi-page docu-ment that is scanned.
