dc02cc0304Page 16 Document Centre Technical Support OperationsFeature Implementation ValuesFront & Back CoverMedia Type@PJL COMMENTOID_ATT_FIRSTLAST_PAGE_MEDIA_TYPE “value”Where value is one of the following:system-default, standard, transparency, labels,drilled, recycled, pre-printed, heavyweight, andother.NOTE: Use this command in conjunction with theprevious and these commands: Front and BackCover Imaged Enable and Front and Back CoverMedia Color.Front & Back CoverMedia Color@PJL COMMENTOID_ATT_FIRSTLAST_PAGE_MEDIA_COLOR “value”Where value is one of the following:yellow, green, buff, white, red, ivory, gray, clear,pink, goldenrod, orange, blue, otherNOTE: Use this command in conjunction withthese commands: Front & Back Cover ImagedEnable and Front & Back Cover Media Type.Front & Back CoverMedia Size@PJL COMMENTOID_ATT_FIRSTLAST_PAGE_MEDIA_SIZE "xxx yyy"Where xxx and yyy are the media sizeexpressed in mm.NOTE: Only use this option when printing blankfront and back covers. Use this command inconjunction with the Front/Back Cover ImageEnable/Disable command and its requiredcommands, that is, Front/Back Cover MediaType, Front/Back Cover Media Color, andFront/Back Cover Imaged Enable/Disable.Image Quality Selection @PJL SET DENSITY= value Where value is a number in the range:1 (lightest) to 7 (darkest).Draft Mode Printing @PJL COMMENTOID_ATT_PRINT_QUALITY valueWhere value is one of the following:OID_VAL_PRINT_QUALITY_NORMALOID_VAL_PRINT_QUALITY_DRAFTJob Type @PJL COMMENT OID_ATT_JOB_TYPEvalueWhere value is one of the following:OID_VAL_JOB_TYPE_PRINTOID_VAL_JOB_TYPE_ PROOF_PRINTBanner Sheet @PJL COMMENTOID_ATT_START_SHEET valueWhere value is one of the following:OID_VAL_JOB_SHEET_FULL (On)OID_VAL_JOB_SHEET_NONE (Off)Interleave @PJL COMMENTOID_ATT_INTERLEAVE valueWhere value is one of the following:OID_VAL_INTERLEAVE_NONEOID_VAL_INTERLEAVE_BLANKOID_VAL_INTERLEAVE_IMAGEDInterleave Media Color @PJL COMMENTOID_ATT_INTERLEAVE_COLOR “value”Where value is one of the following:yellow, green, buff, white, red, ivory, gray, clear,pink, goldenrod, orange, blue, otherAccounting @PJL COMMENTOID_ATT_ACCOUNTING_INFORMATION"UserID|042AccountID";Where UserID is a value the PrinterAdministrator assigns to a user.Where AccountID is a value the PrinterAdministrator assigns to the account.NOTE: Delimit the User ID and the Account IDby a |042.Delay Print @PJL COMMENTOID_ATT_JOB_PRINT_AFTER"yyyymmddhhmmss”Where yyyy is the year, mm is the month, dd isthe date, hh is the hour, mm is the minute ofthe hour, and ss is the second of that minute.NOTE: The hours are expressed in a 24 hourclock. For example: July 29, 1999 at 3:25 PM isexpressed as: 19990729152500.Condensed Printing &k2S See the DC Tip, Formatting Condensed Printfor Document Centre for examples andadditional information.Stair-stepping k2G Helps to resolve stair-stepping in mostinstances.