Xerox Document Centre DC 535 Reference Manual

Contents

dc02cc0304Document Centre Technical Support Operations Page 21Single Staple LocationThe following table indicates the location of single staples for different media sizes whenusing the Document Centre 555/545/535 2000 Sheet Stapler/Stacker (Office Finisher).Media Sizes Portrait Staple Position Landscape Staple Position Legal ( 8.5 x 14 inches) 8.5 x 13 inches (215 x 330 mm) Statement (8.5 x 5.5 inches) A5 ( 148 x 210 mm)Also the following media sizeswhen short-edge feed printing isforced: Letter ( 8.5 x 11 inches) A4 ( 210 x 297 mm)┌──────────┐│| ││ ││ ││ Portrait ││ ││ ││ │└──────────┘┌───────────────┐│/ ││ ││ Landscape ││ ││ │└───────────────┘Note that you should use "RotatedLandscape" mode to ensure optimalstaple location. Letter ( 8.5 x 11 inches) 7.25 x 10.5 inches 8 x 10 inches 9 x 11 inches A4 ( 210 x 297 mm) Oversized A4 (223 x 297 mm) B5 (182 x 257 mm)┌──────────┐│/ ││ ││ ││ Portrait ││ ││ ││ │└──────────┘┌───────────────┐│ \││ ││ Landscape ││ ││ │└───────────────┘Note that stapling in the top-leftcorner is not possible with thesemedia sizes. Ledger ( 11 x 17 inches ) A3 ( 297 x 420 mm) B4 (257 x 364 mm)┌──────────┐│ \││ ││ ││ Portrait ││ ││ ││ │└──────────┘Note that stapling in the top-leftcorner is not possible with thesemedia sizes.┌───────────────┐│/ ││ ││ Landscape ││ ││ │└───────────────┘Note that you should use "RotatedLandscape" mode to ensure optimalstaple location.