Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide Page 4-9Print Driver Installation for Networked PrintersWindows XP (Internet Printing Protocol)NOTE: Windows XP supports printing via IPP as standard when TCP/IP is installed on aWindows XP Workstation.Use the Add Printer Wizard to add the WorkCentre 4118 / FaxCentre 2218 to the network.¾ Select [Start] and then select [Printers and Faxes].Double-click on the [Add Printer] icon to display the Add Printer Wizard.¾ Verify that the [Network Printer] is selected and click [Next].The [Locate Your Printer] screen displays.¾ Select [Connect to a printer on the Internet or on a home or office network].The [Specify a Printer] screen displays.In the URL field enter the IP address or hostname of the printer in the following format:http://aaa.bbb.ccc.ddd or http://printer-host-name, where aaa.bbb.ccc.ddd is the IPaddress of the WorkCentre 4118 / FaxCentre 2218 and printer-host-name is the host nameof the WorkCentre 4118 / FaxCentre 2218 registered with a DNS server.The Add Printer Wizard will then ask if you wish to install a local driver for this printer. Youshould click [OK] to install the driver.¾ Insert the CD containing the WorkCentre 4118 / FaxCentre 2218 drivers and select [HaveDisk].Browse to the required Windows XP driver on the CD and select [OK].NOTE: The driver will be found in the Drivers>Print folder on the CD in the appropriate PCLor PostScript® 3TM folder. The driver is identified by the file extension .inf.Select [Next], and select [Next] again and the WorkCentre 4118 / FaxCentre 2218 driverwill be loaded onto the workstation.A dialog box displays with a message regarding the printing of a test page.Select [Finish] to accept the Yes choice.¾ Continue with Test Print, see Test Print 8-16.12345